
22.124
Command Line Interface Reference InForm OS Version 2.2.4
■ Peer_Address. IP address of the Remote Copy storage server port connected to this
Remote Copy port.
■ Address. IP address of the Remote Copy storage server port.
■ State. Remote copy end-to-end transport state. Can include one of the following results:
◆ new. Configuration is not completed on this port.
◆ incomplete. Configuration is not yet completed on the peer port.
◆ ready. Configuration is completed on this port and the peer port; transport is ready for
use.
◆ missing. A configured transport was disconnected.
■ Type. Indicates the port connection type.
◆ rcip. Port is used for Remote Copy over IP (RCIP).
◆ rcfc. Port is used for Remote Copy over FC (RCFC).
The following example displays status and information about the end-to-end transport for
RCIP ports:
The columns in the previous example are identified as follows:
■ N:S:P. The physical position of the port, in the syntax node:slot:port.
■ State. Remote copy end-to-end transport state. Can include one of the following results:
◆ new. Configuration is not completed on this port.
◆ incomplete. Configuration is not yet completed on the peer port.
◆ ready. Configuration is completed on this port and the peer port; transport is ready for
use.
◆ missing. A configured transport was disconnected.
■ HwAddr. Hardware address of the Ethernet port indicated in the N:S:P column.
cli% showrctransport -rcip
N:S:P State HwAddr IPAddress PeerIPAddress Netmask Gateway MTU Rate Duplex
0:1:1 new 000423C21B72 192.168.25.226 - 255.255.255.0 - 1500 1Gbps Full
0:1:1 new 000423C21B73 192.168.25.226 - 255.255.255.0 - 1500 n/a Half
1:2:1 new 000423ADE95E 192.168.25.227 - 255.255.255.0 - 1500 1Gbps Full
1:2:1 new 000423ADE95F 192.168.25.227 - 255.255.255.0 - 1500 n/a Half
Kommentare zu diesen Handbüchern