Seagate ST3390N Installationsanleitung PDF herunterladen (Seite 37)

100

101

Unpacking and inspecting the equipment 4-3

Unpacking and inspecting

Standard 1.0 Modular Option EC Installation and Maintenance Guide November 1999

Unpacking and inspecting

Introduction

To unpack and inspect the equipment, follow these steps.

Step Action

1 If the equipment is mounted on a shipping pallet, follow the

unpacking instructions provided with the packaging material

and remove the equipment from the pallet.

2 Cut any remaining strapping or tape.

3 Remove the transport protection devices and loosen any

stretch-wrap film from the equipment.

You can remove the stretch-wrap film at your own discretion.

However, it is advisable to keep the film wrapped loosely

around the equipment during handling.

Retain the packaging material in case you need to return any

equipment.

4 Check all items delivered against the order form and the

packing slip.

Report any errors or omissions to your supplier.

See Appendix A in the

Site and Installation Planning Guide

(NTP 555-7061-200) for a list of part numbers.

5 Remove all hardware components that were shipped in

separate boxes and check for loose parts, broken edges, and

any other obvious damage to the components.

Components that are usually shipped in separate boxes include

documentation, disk and tape units, power supply, cables,

administration terminals, printer, and spares.

6 Place the equipment, unpacked, in a safe, dry area in the

equipment room, close to its final location.

7 Repack the hardware components in their boxes until you are

ready to install the system.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 467 468

Kommentare zu diesen Handbüchern

Keine Kommentare

Seagate ST3390N Installationsanleitung Seite 37

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Seagate ST3390N