Seagate ST31230N/ND Installationsanleitung PDF herunterladen (Seite 39)

Unpacking and inspecting the EC 11 equipment 4-5

Inspecting the equipment

Standard 1.0 Option 11 EC Installation and Maintenance Guide November 1999

Inspecting the equipment

Inspecting

To check the modules and the backplane connectors, follow

these steps.

Step Action

1 Check all equipment for

• loose parts

• broken edges

• any other obvious damage to the components

• damaged connectors or connectors containing

foreign material

• defects in the molded plastic covers

• loose items in the shipping cartons

2 Repack the hardware and peripheral components in

their boxes until you are ready to install the system.

3 Prepare a clean, dry surface upon which you will

place printed circuit packs (PCPs). Ensure that there

are electrostatic discharge containers available, and

that you are wearing antistatic wrist straps.

4 Check each PCP to ensure that it is not bent, and

that there are no loose parts. Place the PCPs in

separate electrostatic discharge containers.

5 With a flashlight, inspect the connectors on the

backplane for

• bent pins

• broken pins

• foreign material

6 Report any damaged equipment to your supplier.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 271 272

Keine Kommentare

Seagate ST31230N/ND Installationsanleitung Seite 39