Seagate ST1.2 Series Spezifikationen PDF herunterladen (Seite 12)

ST1 1

M/ST1

Controller Installation Guide, Rev. E

2.2 Non-Paired Drive formatting

Seagate

non-paired drives do not have installation software or recog-

nizable format. These drives may be installed by following the proce-

dures in Section 4.0.

2.3 Paired Drives with Less than 32 Formatted MBytes

You will need one DOS-bootable diskette that has the boot files from the

version of DOS that you plan to use on your

Seagate

drive. This diskette

should also contain the FORMAT program provided with DOS, and

sufficient space (approximately 50

KBytes)

to save the installation

programs from the hard drive. The diskette must not be write-protected.

2.4 Paired Drives with Greater than 32 Formatted MBytes

You will need two diskettes; one DOS-bootable with the version of DOS

you plan to use. The second diskette must have at least 360K Bytes

available to save the installation and DISK MANAGER programs. The

diskettes must not be write-protected.

2.5 CMOS Configuration

If you are installing your drive in a PC/AT and a hard drive is not presently

attached or operational, the hard drive count in CMOS will already be

set to zero.

If a standard hard drive is already attached and operating, it will be the

first drive and the

Seagate

Paired Program drive will be Drive 2. It is not

necessary to change the CMOS hard drive count when installing with

ST1

M/ST1

controllers.

2.6 Read/Write Head Parking

A PARK program is preloaded on all Paired Program drives. The

following drives require this program before the drive/system is

transported:

ST124,

ST137R,

ST225

ST225R,

ST238R,

ST250R.

All

other

Seagate

drives feature automatic head parking at power-down.

1 2 ... 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Seagate ST1.2 Series Spezifikationen Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Seagate ST1.2 Series