Seagate ST3250824NS Anleitung zur Fehlerbehebung PDF herunterladen (Seite 24)

24 R/Evolution 2730 Release Notes for Software Version J200R05 • October 2007

The Solaris SAN Foundation Kit includes fp and fcp drivers, which each have a

timeout setting. The default for

fcp_offline_delay is 20 seconds. To avoid

certain filesystem warning messages when a cable is removed or a controller is

killed or shut down, you can change the timeout setting to 60 seconds by changing

this line on Solaris 9 hosts in

/kernel/drv/fcp.conf:

fcp_offline_delay=60;

Note – One reboot of the host is necessary for this parameter to take effect.

Red Hat Enterprise Linux HBA Support

Fibre Channel HBAs you can use with Red Hat Enterprise Linux 4.0 are shown

below.

SUSE Linux HBA Support

Fibre Channel HBAs you can use with SUSE Linux 9.0 are shown below.

Table 11 RedHat 4.0-Supported HBAs

HBA Driver

Emulex LP 11002 8.0.16.32 or later

Emulex LPe11002 8.0.16.32 or later

Qlogic QLA2462 8.01.07 or later

Qlogic QLE2462 8.01.07 or later

Table 12 SUSE 9.0-Supported HBAs

HBA Driver

Emulex LP 11002 8.0.16.32 or later

Emulex LPe11002 8.0.16.32 or later

Qlogic QLA2462 8.01.07

Qlogic QLE2462 8.01.07

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Keine Kommentare

Seagate ST3250824NS Anleitung zur Fehlerbehebung Seite 24