Seagate ST34572WC Spezifikationen Seite 55

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 67
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 54
55
Max PV 16
Cur PV 1
Act PV 1
Max PE per PV 4350
VGDA 2
PE Size (Mbytes) 4
Total PE 4340
Alloc PE 3740
Free PE 600
Total PVG 0
Total Spare PVs 0
Total Spare PVs in use 0
In this example, the total free space is 600 * 4 MB, or 2400 MB.
b. The logical volume is mirrored with a strict allocation policy, and there are not
enough extents on a separate disk to comply with the allocation policy. To confirm
this, run lvdisplay to determine which disks the logical volume occupies, and then
check whether there is sufficient space on the other disks in the volume group.
c. In a SAN environment, one of the disks was dynamically increased in size. LVM did
not detect the asynchronous change in size.
Recommended Action:
a. Choose a smaller size for the logical volume, or add more disk space to the volume
group.
b. Choose a smaller size for the logical volume, or add more disk space to the volume
group. Alternatively, free up space on an available disk using pvmove.
c. None. LVM does not support dynamic resizing of disks.
Note: When an LVM volume group is created, several configuration parameters are set
(such as max_pe, max_pv, and max_lv). The new vgmodify command enables you to
change these configuration parameters on an existing volume group, which avoids having
to migrate user data. For more information, see vgmodify(1M) and the LVM Volume Group
Dynamic LUN expansion (DLE)/vgmodify whitepaper.
"m": Illegal option.
Cause:
The system does not have HP MirrorDisk/UX installed.
Recommended Action:
Install HP MirrorDisk/UX.
lvlnboot
lvlnboot: Unable to configure swap logical volume. Swap logical volume
size beyond the IODC max address.
Cause:
The boot disk firmware cannot access the entire range of the swap logical volume. This
happens with older host bus adapters when primary swap is configured past 4 GB on the
disk.
Recommended Action:
Upgrade the system firmware or use a newer host bus adapter that supports block
addressing. If neither of these actions is successful, reduce the size of the primary swap
logical volume so that it does not exceed 4 GB.
Seitenansicht 54
1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 66 67

Kommentare zu diesen Handbüchern

Keine Kommentare