Seagate ST446452W Betriebsanweisung PDF herunterladen (Seite 101)

Document number: 55-16-001-002

101 / 122

[ttya] Section

The ttya section is used to configure the first serial port (sometimes used as the console) on the SPARC virtual machine. Using these options it is

possible to attach the virtual serial port to a network socket or a physical serial port attached to the host. The list below describes the options that

can be configured:

port – Virtual serial port specification.

start_console – Start PuTTY at virtual machine boot.

type – Virtual serial port type.

port

Virtual serial port specification.

Syntax

port = port-spec

Description

This option is dependent on the setting of the option. The table below describes the valid values for .type port-spec

Virtual Serial Port Types

Port Type Port Specification Description

physical Path to physical device, e.g. /dev/tt

yS0

The virtual serial port will be attached to a physical serial port attached to

the host.

socket TCP/IP socket number, e.g. 9000 The virtual serial port will be attached to a network port that can be

connected to

terminal

start_console

Start PuTTY at virtual machine boot.

Syntax

on | offstart_console =

Description

This option enables (or disables) the automatic starting of PuTTY when the virtual machine starts.

This option is enabled by default.

type

Virtual serial port type.

Syntax

= type port-type

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 121 122

Kommentare zu diesen Handbüchern

Keine Kommentare

Seagate ST446452W Betriebsanweisung Seite 101

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Seagate ST446452W