Seagate ST31276A Spezifikationen PDF herunterladen (Seite 11)

ST3144 Familv Installation Guide. Rev. D

Check all cards. Make sure all cards are securely seated in

the expansion slots on the motherboard. Full size (16-bit)

cards cannot be plugged into half-size (8-bit) slots. Make sure

all cards are plugged into appropriately sized expansion slots.

Once the cards are permanently installed, and the system is

running properly, use mounting screws to secure them in

place.

Check the power supply specifications. The output of your

power supply may not meet the power requirements of the new

devices you are installing. If you are not sure whether the

power supply meets the system requirements, consult your

system dealer or distributor.

Use the same version of DOS throughout your system.

The same version of DOS must be used throughout all phases

of building and configuring your system.

Verify the CMOS drive type. The CMOS drive type must

approximate, but not exceed, the physical specifications and

maximum drive capacity of the disc drive. Refer to the Default

Drive Geometry section of this installation guide for drive

specifications and CMOS configuration information.

Check for viruses. Before installing any new software, scan

the installation diskettes for viruses. After the software has

been installed on the hard disc, scan that drive for viruses.

Symptoms of viruses can include intermittent system lock-ups,

re-boots, drive errors, etc.

1 2 ... 6 7 8 9 10 11

Keine Kommentare

Seagate ST31276A Spezifikationen Seite 11