Seagate ST310014ACE Handbuch PDF herunterladen (Seite 28)

20 ST310014ACE Product Manual, Rev. D

3.0 ATA interface

These drives use the industry-standard ATA task file interface that

supports 16-bit data transfers. It supports ATA programmed input/output

(PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes

0–5. The drive also supports the use of the IORDY signal to provide

reliable high-speed data transfers.

You can use a daisy-chain cable to connect two drives to a single AT

host bus. For detailed information about the ATA interface, refer to the

draft of AT Attachment with Packet Interface Extension (ATA/ATAPI-Rev

6), NCITS T13 1153D, subsequently referred to as the Draft ATA-Rev 6

Standard.

3.1 ATA interface signals and connector pins

Figure 5 on page 21 summarizes the signals on the ATA interface

connector that the drive supports. For a detailed description of these

signals, refer to the Draft ATA-Rev 6 Standard.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 39 40

Keine Kommentare

Seagate ST310014ACE Handbuch Seite 28