Seagate Medalist 1721 Installationsanleitung PDF herunterladen (Seite 5)

Medalist 1721, 1010, Rev. B 1

What you need

•

Straight-edge and Phillips screwdrivers

•

Four 6-32 UNC drive mounting screws

•

An ATA host adapter and interface cable (max length: 18

inches) with enough connectors for all your drives

•

An unused drive power cable for your new drive

•

A bootable DOS system diskette (Seagate recommends using

DOS Version 5.0 or later.)

•

If you are mounting this 3.5-inch drive in a 5.25-inch drive bay,

you need a mounting adapter or frame kit. Also, you may need

drive mounting rails if your drive bay is not designed for direct

mounting.

Before you begin

•

Make sure your computer is turned off before you open the

case.

•

Read the handling precautions following and inspect the drive

to make sure that it is not damaged.

•

Save your foam-lined Seagate



disc drive box. Seagate has

approved this box for shipping a Seagate disc drive. Using any

other container or packing material voids your drive warranty.

1 2 3 4 5 6 7 8 9 10 ... 41 42

Keine Kommentare

Seagate Medalist 1721 Installationsanleitung Seite 5