Seagate FreeAgent Bedienungsanleitung PDF herunterladen (Seite 14)

FreeAgent Pro Data Mover 12

Changing Hardware

Interfaces

The FreeAgent™ Pro is equipped with an interchangeable USB/eSATA, or 1394 module.

The module is fastened to the base of the unit with a screw. The slot on the screw is curved

to accommodate the edge of a coin. We recommend using a coin as a screwdriver when

swapping interface modules.

Switching USB/eSata - 1394 Interfaces

Warning: Do not use a regular screwdriver to perform this operation.

To switch from one interface to another,

Step 1: Turn the drive off and remove all cabling.

Step 2: Flip the unit over and use a coin to loosen the screw by turning it counterclockwise.

Use your fingers to unscrew it the rest of the way.

Figure 1: Loosen Module Screw

Step 3: After the screw is completely loose, use your fingernails to grasp the screw head

and lift the module straight up from the base:

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 38 39

Keine Kommentare

Seagate FreeAgent Bedienungsanleitung Seite 14