
Chapter 3. SVA Path Operation 17
In our example, the following command will show that each
device in Figure 3-4, “Example setsp -a Output in Determining
Load Balancing” is accessible via four paths, using HBAs "glm3",
"glm4", “lpfc0” and “lpfc1”:
# spmon show
Figure 3-5 Example spmon show Output
The column headings describe the various fields on the screen:
• FDev identifies the SVA Path device and the zero-based
index of the FDev within the device, separated by a colon.
• Path identifies the current path assigned to the FDev and the
name of the host bus adapter used by that path.
• I/O Load estimates channel utilization time during the
current measurement interval. The I/O Load may be
expressed as one of the following formats:
milliseconds (with an "ms" suffix) if it is less than one
second. For example, 350ms = 350 milliseconds
# spmon show
Total I/O load across monitored HBAs = 103.2s
HBA Device I/O Load %load
------------------------------
c1 glm3 40.1s 38.8%
c2 glm4 20.8s 20.2%
c4 lpfc0 21.2s 20.6%
c5 lpfc1 21.1s 20.5%
Device c6t0d0 [STK 9500 0000000010850000]
FDev Path I/O Load HBA Load
----------------------------------------------------------
spd0:0 0/glm3/sd66 9.9s 40.1s 24.8%
Device c6t0d1 [STK 9500 0000000010850001]
FDev Path I/O Load HBA Load
----------------------------------------------------------
spd1:0 0/glm3/sd67 10.1s 40.1s 25.1%
spd1:1 3/lpfc1/sd190 21.2s 21.1s 100.0%
Device c6t0d2 [STK 9500 0000000010850002]
FDev Path I/O Load HBA Load
----------------------------------------------------------
spd2:0 0/glm3/sd68 9.9s 40.1s 24.7%
spd2:1 1/glm4/sd90 20.9s 20.8s 100.0%
spd2:2 2/lpfc0/sd147 21.2s 21.2s 100.0%
Device c6t0d3 [STK 9500 0000000010850222]
FDev Path I/O Load HBA Load
----------------------------------------------------------
spd3:0 0/glm3/sd69 10.0s 40.1s 24.9%
Kommentare zu diesen Handbüchern