Seagate Pulsar XT.2 Handbuch

Stöbern Sie online oder laden Sie Handbuch nach Solid State Drives Seagate Pulsar XT.2 herunter. Seagate Pulsar XT.2 Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 74
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Product Manual
Pulsar
®
XT.2 SAS
100647497
Rev. B
June 2011
Standard Models
ST400FX0002
ST200FX0002
ST100FX0002
Self-Encrypting Drive Models
ST400FX0012
Seitenansicht 0
1 2 3 4 5 6 ... 73 74

Inhaltsverzeichnis

Seite 1 - XT.2 SAS

Product ManualPulsar® XT.2 SAS100647497Rev. BJune 2011Standard Models ST400FX0002ST200FX0002ST100FX0002Self-Encrypting Drive Models ST400FX0012

Seite 2 - Revision history

2 Pulsar XT.2 SAS Product Manual, Rev. B2.0 ScopeThis manual describes Seagate Technology® LLC, Pulsar® XT.2 SAS (Serial Attached SCSI) drives.Pulsar

Seite 3 - Contents

Pulsar XT.2 SAS Product Manual, Rev. B 33.0 Applicable standards and reference documentationThe drives documented in this manual have been developed a

Seite 4

4 Pulsar XT.2 SAS Product Manual, Rev. B3.1.2 Electromagnetic complianceSeagate uses an independent laboratory to confirm compliance with the directiv

Seite 5

Pulsar XT.2 SAS Product Manual, Rev. B 53.1.4 China Restriction of Hazardous Substances (RoHS) DirectiveThis product has an Environmental Protection U

Seite 6

6 Pulsar XT.2 SAS Product Manual, Rev. B4.0 General descriptionPulsar XT.2 drives provide high performance, high capacity data storage for a variety o

Seite 7 - List of Figures

Pulsar XT.2 SAS Product Manual, Rev. B 7• Automatic data encryption/decryption• Controlled access• Random number generator• Drive locking• 16 independ

Seite 8

8 Pulsar XT.2 SAS Product Manual, Rev. B4.5 Formatted capacitiesStandard OEM models are formatted to 512 bytes per block. The block size is selectable

Seite 9

Pulsar XT.2 SAS Product Manual, Rev. B 94.8 Thin Provisioning4.8.1 Logical Block ProvisioningThe drive is designed with a feature called Thin Provisio

Seite 10 - 2.0 Scope

10 Pulsar XT.2 SAS Product Manual, Rev. BWhen a region of LBA's are erased via cryptographic erase, as part of the erase, the drive shall unmap t

Seite 11 - 3.1 Standards

Pulsar XT.2 SAS Product Manual, Rev. B 115.0 Performance characteristicsThis section provides detailed information concerning performance-related char

Seite 12

Revision history© 2011 Seagate Technology LLC. All rights reserved.Publication number: 100647497, Rev. B June 2011Seagate, Seagate Technology and the

Seite 13 - 3.2 Reference documents

12 Pulsar XT.2 SAS Product Manual, Rev. B5.2.2 FORMAT UNIT command execution time for 512-byte LBA’s (minutes)The device may be formatted as either a

Seite 14 - 4.0 General description

Pulsar XT.2 SAS Product Manual, Rev. B 13Due to the nature of Flash memory technologies there are many factors that can result in values different tha

Seite 15 - 4.4 Reliability

14 Pulsar XT.2 SAS Product Manual, Rev. B6.0 Reliability specificationsThe following reliability specifications assume correct host and drive operatio

Seite 16 - 4.5 Formatted capacities

Pulsar XT.2 SAS Product Manual, Rev. B 156.1.1 Unrecoverable ErrorsAn unrecoverable data error is defined as a failure of the drive to recover data fr

Seite 17 - 4.8 Thin Provisioning

16 Pulsar XT.2 SAS Product Manual, Rev. B6.2.5 Data RetentionData Retention is another major characteristic of SSD's that must be accounted for b

Seite 18 - Drive Configuration

Pulsar XT.2 SAS Product Manual, Rev. B 17the static electricity from the drive carrier prior to inserting it into the system.6.3.4 S.M.A.R.T.S.M.A.R.T

Seite 19

18 Pulsar XT.2 SAS Product Manual, Rev. BError rate is the number of errors per operation. The algorithm that S.M.A.R.T. uses to record rates of error

Seite 20

Pulsar XT.2 SAS Product Manual, Rev. B 196.3.6 Drive Self Test (DST)Drive Self Test (DST) is a technology designed to recognize drive fault conditions

Seite 21 - 5.4 Cache control

20 Pulsar XT.2 SAS Product Manual, Rev. B6.3.6.2.3 Short and extended testsDST has two testing options:1. short2. extendedThese testing options are de

Seite 22 - 6.1 Error rates

Pulsar XT.2 SAS Product Manual, Rev. B 216.3.7 Product warrantyBeginning on the date of shipment to the customer and continuing for the period specifi

Seite 23 - 6.2 Endurance Management

Pulsar XT.2 SAS Product Manual, Rev. B iContents1.0 Seagate Technology support services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Seite 24 - 6.3 Reliability and service

22 Pulsar XT.2 SAS Product Manual, Rev. B7.0 Physical/electrical specificationsThis section provides information relating to the physical and electric

Seite 25 - S.M.A.R.T. delay times 75 ms

Pulsar XT.2 SAS Product Manual, Rev. B 237.3 DC power requirements Table 8: 400GB standard model DC power requirementsParameter 400GB (6.0Gb)Regulati

Seite 26 - °C 0 to 65°C

24 Pulsar XT.2 SAS Product Manual, Rev. BTable 9: 200GB standard model DC power requirementsParameter 200GB (6.0Gb)Regulation ±5% ±5%Voltage +5V +12V

Seite 27

Pulsar XT.2 SAS Product Manual, Rev. B 25[1] Measured with average reading DC ammeter. Instantaneous +12V current peaks will exceed these values. Powe

Seite 28

26 Pulsar XT.2 SAS Product Manual, Rev. BGeneral DC power requirement notes.1. Minimum current loading for each supply voltage is not less than 1.7% o

Seite 29

Pulsar XT.2 SAS Product Manual, Rev. B 27 Figure 2. Current profiles for 200GB modelsFigure 3. Current profiles for 100GB models

Seite 30 - 7.2 AC power requirements

28 Pulsar XT.2 SAS Product Manual, Rev. B7.4 Power dissipation 400GB models in 6Gb operationTypical power dissipation under idle conditions in 6Gb ope

Seite 31 - 7.3 DC power requirements

Pulsar XT.2 SAS Product Manual, Rev. B 29100GB models in 6Gb operationTypical power dissipation under idle conditions in 6Gb operation is 4.04 watts 1

Seite 32

30 Pulsar XT.2 SAS Product Manual, Rev. Bb. Non-operating–40° to 158°F (–40° to 70°C) package ambient with a maximum gradient of 36°F (20°C) per hour.

Seite 33

Pulsar XT.2 SAS Product Manual, Rev. B 317.5.4.1 Shocka. Operating—normalThe drive, as installed for normal operation, shall operate error free while

Seite 34

ii Pulsar XT.2 SAS Product Manual, Rev. B6.3.7 Product warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Seite 35

32 Pulsar XT.2 SAS Product Manual, Rev. B7.5.4.2 Vibrationa. Operating—normalThe drive as installed for normal operation, shall comply with the comple

Seite 36 - 7.4 Power dissipation

Pulsar XT.2 SAS Product Manual, Rev. B 337.6 Mechanical specificationsRefer to Figure 10 or 11 for detailed mounting configuration dimensions. See Sec

Seite 37 - 7.5 Environmental limits

34 Pulsar XT.2 SAS Product Manual, Rev. BNote. These dimensions conform to the Small Form Factor Standard documented in SFF-8201 and SFF-8223 found at

Seite 38

Pulsar XT.2 SAS Product Manual, Rev. B 358.0 About self-encrypting drivesSelf-encrypting drives (SEDs) offer encryption and security services for the

Seite 39

36 Pulsar XT.2 SAS Product Manual, Rev. B8.2.2 Locking SPThe Locking SP controls read/write access to the media and the cryptographic erase feature. A

Seite 40

Pulsar XT.2 SAS Product Manual, Rev. B 378.6 Cryptographic eraseA significant feature of SEDs is the ability to perform a cryptographic erase. This in

Seite 41 - 7.6 Mechanical specifications

38 Pulsar XT.2 SAS Product Manual, Rev. B9.0 Defect and error management Seagate continues to use innovative technologies to manage defects and errors

Seite 42 - SFF-8223 found at

Pulsar XT.2 SAS Product Manual, Rev. B 39The DIE field contains the die number within channel.The BLOCK field contains the block number within the die

Seite 43 - 8.2 Controlled access

40 Pulsar XT.2 SAS Product Manual, Rev. B9.6 Protection Information (PI)Protection Information is intended as a standardized approach to system level

Seite 44 - 8.5 Data bands

Pulsar XT.2 SAS Product Manual, Rev. B 4110.0 InstallationPulsar XT.2 drive installation is a plug-and-play process. There are no jumpers on the drive

Seite 45 - 8.10 RevertSP

Pulsar XT.2 SAS Product Manual, Rev. B iii11.2 Dual port support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Seite 46

42 Pulsar XT.2 SAS Product Manual, Rev. B10.2 Cooling Cabinet cooling must be designed by the customer so that the temperature of the drive will not e

Seite 47 - 9.5 Auto-Reallocation

Pulsar XT.2 SAS Product Manual, Rev. B 4310.3 Drive mountingMount the drive using the bottom or side mounting holes. If mounting the drive using the b

Seite 48

44 Pulsar XT.2 SAS Product Manual, Rev. B11.0 Interface requirements This section partially describes the interface requirements as implemented on Pul

Seite 49 - 10.0 Installation

Pulsar XT.2 SAS Product Manual, Rev. B 4511.2 Dual port supportPulsar XT.2 SAS drives have two independent ports. These ports may be connected in the

Seite 50 - 10.2 Cooling

46 Pulsar XT.2 SAS Product Manual, Rev. B11.3 SCSI commands supported Table 14 lists the SCSI commands supported by Pulsar XT.2 drives. Table 14: S

Seite 51 - 10.4 Grounding

Pulsar XT.2 SAS Product Manual, Rev. B 47 Last n Deferred Errors or Asynchronous Events page (0Bh) N Last n Error Events page (07h) N Non-medium Er

Seite 52 - 11.0 Interface requirements

48 Pulsar XT.2 SAS Product Manual, Rev. BREAD (32) 7Fh/0009h YREAD BUFFER (modes 0, 2, 3, Ah And Bh supported) 3Ch Y (non-SED drives only)READ CAPACIT

Seite 53 - 11.2 Dual port support

Pulsar XT.2 SAS Product Manual, Rev. B 49[1] Pulsar XT.2 drives can format to 512, 520, 524, 528, 4096, 4160, 4192 and 4224 bytes per logical block.[2

Seite 54 - 11.3 SCSI commands supported

50 Pulsar XT.2 SAS Product Manual, Rev. B11.3.1 INQUIRY data Table 15 lists the INQUIRY command data that the drive should return to the initiator per

Seite 55

Pulsar XT.2 SAS Product Manual, Rev. B 512. Saved valuesSaved values are stored on the drive’s media using a MODE SELECT command. Only parameter value

Seite 56

iv Pulsar XT.2 SAS Product Manual, Rev. B

Seite 57

52 Pulsar XT.2 SAS Product Manual, Rev. BTable 16: MODE SENSE data for 400GB drives MODE DATA HEADER: 01 3e 00 10 01 00 00 10 BLOCK DESCRIPTOR: 00

Seite 58

Pulsar XT.2 SAS Product Manual, Rev. B 53Table 17: MODE SENSE data for 200GB drives MODE DATA HEADER: 01 3e 00 10 01 00 00 10 BLOCK DESCRIPTOR: 00

Seite 59

54 Pulsar XT.2 SAS Product Manual, Rev. BTable 18: MODE SENSE values for 100GB drives MODE DATA HEADER: 01 3e 00 10 01 00 00 10 BLOCK DESCRIPTOR: 0

Seite 60

Pulsar XT.2 SAS Product Manual, Rev. B 5511.4 Miscellaneous operating features and conditions Table 19 lists various features and conditions. A “Y” in

Seite 61

56 Pulsar XT.2 SAS Product Manual, Rev. B Figure 15. SAS device plug dimensionsC OF DATUM BL5.081.27 (6X)1.27 (14X)15.8750.35MIN15.87533.43 0.05B4.

Seite 62

Pulsar XT.2 SAS Product Manual, Rev. B 57Figure 16. SAS device plug dimensions (detail)6.10Detail A0.30 0.05 x 45 (5X)0.40 0.05 X 45 (3X)CORING A

Seite 63

58 Pulsar XT.2 SAS Product Manual, Rev. B11.4.2 Physical characteristics This section defines physical interface connector.11.4.3 Connector requiremen

Seite 64 - C OF DATUM B

Pulsar XT.2 SAS Product Manual, Rev. B 5911.4.6 SAS transmitters and receiversA typical SAS differential copper transmitter and receiver pair is shown

Seite 65

60 Pulsar XT.2 SAS Product Manual, Rev. BThe Ready LED Out signal is designed to pull down the cathode of an LED. The anode is attached to the proper

Seite 66

Pulsar XT.2 SAS Product Manual, Rev. B 61IndexNumerics12 voltpins 595 volt pins 596 Gbps 60Aabort task set function 44AC coupling 59AC power

Seite 67 - 11.5 Signal characteristics

Pulsar XT.2 SAS Product Manual, Rev. B vList of FiguresFigure 1. Current profiles for 400GB models . . . . . . . . . . . . . . . . . . . . . . . . .

Seite 68 - 11.7 Additional information

62 Pulsar XT.2 SAS Product Manual, Rev. Belectromagnetic compatibility 3electromagnetic susceptibility 32EMI requirements 3encryption engine 3

Seite 69

Pulsar XT.2 SAS Product Manual, Rev. B 63Reservation conflict 55Task set full 55miscorrected media data 14Mode sensedata, table 50, 52, 53

Seite 70

64 Pulsar XT.2 SAS Product Manual, Rev. Bself-encrypting drives 35Self-Monitoring Analysis and Reporting Technology7, 17Serial Attached SCSI (SAS)

Seite 72

Seagate Technology LLCAMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 ASI

Seite 74 - June 2011

Pulsar XT.2 SAS Product Manual, Rev. B 11.0 Seagate Technology support servicesSEAGATE ONLINE SUPPORT and SERVICESFor information regarding products a

Kommentare zu diesen Handbüchern

Keine Kommentare