Seagate ST500LM020 Betriebsanweisung PDF herunterladen (Seite 8)

Installation | Wave Systems Corp.  2012

ESC 2.9.5 Client Manual

2.2. Upgrades

ESC 2.9.5 supports direct upgrades from ESC 2.8.4 and ESC 2.8.0. The drive the drive can remain

initialized while performing this upgrade install. Chained upgrades from 2.7.3 to 2.8.4 to 2.9.5 are also

supported.

Upgrade procedure:

1. Navigate to the root directory of the ESC installation media.

2. Run WaveSetup.exe with administrator privileges.

3. Follow the installation wizard.

4. Restart the endpoint.

If upgrading from 2.7.3 or earlier: The upgrade process will automatically

disable Secure Windows Logon. If this is set locally, you will need to re-enable

it. If Secure Windows Logon was set by policy and if connected to the domain

controller the client will perform a gpupdate after installation, so Secure

Windows Logon will be reset following the installation.

If using fingerprint readers: Ensure that NTRU TSS is *NOT* installed on the

endpoint *PRIOR* to upgrade or installation of ESC. Failure to do this check

may result in fingerprint logon and new fingerprint enrollments to fail.

If ESC is installed with the NTRU TSS is still installed, and the fingerprint

authentication is no longer functioning, then perform the following

procedure:

1. Uninstall the NTRU TSS.

2. Reboot.

3. Uninstall ESC 2.9.5.

4. Reboot.

5. Install ESC 2.9.5.

6. Reboot.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 62 63

Keine Kommentare

Seagate ST500LM020 Betriebsanweisung Seite 8