Seagate ST2500418AS Bedienungsanleitung PDF herunterladen (Seite 12)

DVR User’s Manual

3. General System Setup

Before operating the DVR, some general configuration should be setup first.

The following subsections will introduce function keys on the front panel and

general configuration of the DVR.

The regular displayed OSD information and its displayed positions are shown

as following figure. Title of the channel will be displayed on the top-center of

the gird, either in full-screen mode or in multiple channel mode. The current

operation status and date/time information will be displayed in the status bar

at the bottom of the screen. Move the cursor to any status bar icon and its

description will be displayed. Refer to the Setup Guide for a list of status bar

icons and their descriptions.

CH1

CH2

CH3

2010/12/09 04:31:22 PM

CH4

3.1 Front Panel Introduction

The front panel controls enable users to control the unit and preset the

programmable functions.

3.1.1 LED Definition

The LEDs on the front panel of the DVR are described as follows.

Alarm LED

The LED lights up when an alarm is triggered.

REC LED

The LED blinks while the DVR is recording.

Network LED

The LED lights up when the DVR is connected to a

network and blinks when data is being transferred.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 67 68

Keine Kommentare

Seagate ST2500418AS Bedienungsanleitung Seite 12