SEAGATE VIDEO 2.5 HDD PRODUCT MANUAL, REV. F 15
3.4 DRIVE MOUNTING
You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes.
Refer to Figure 3 for drive mounting dimensions. Follow these important mounting precautions when mounting the drive:
Allow a minimum clearance of 0.030 in (0.76 mm) around the entire perimeter of the drive for cooling.
Use only M3 UNC mounting screws.
Four (4) threads (0.080 in) minimum screw engagement recommended.
Do not overtighten the mounting screws (maximum torque: 4.0 in-lb).
Figure 3 Mounting Dimensions (500, 320 & 250GB models)
BREATHER HOLE,
DO NOT COVER OR SEAL
RECOMMENDED CASE TEMP
MEASUREMENT LOCATION
ON THE END OF THE DRIVE
Kommentare zu diesen Handbüchern