Product ManualSavvio® 10K.5 SAS100628561Rev. GJanuary 2012Standard Models ST9900805SSST9600205SSST9450405SSST9300605SSSelf-Encrypting Drive Models ST9
2 Savvio 10K.5 SAS Product Manual, Rev. G2.0 ScopeThis manual describes Seagate Technology® LLC, Savvio® 10K.5 SAS (Serial Attached SCSI) disk drives.
Savvio 10K.5 SAS Product Manual, Rev. G 33.0 Applicable standards and reference documentationThe drives documented in this manual have been developed
4 Savvio 10K.5 SAS Product Manual, Rev. G3.1.2 Electromagnetic complianceSeagate uses an independent laboratory to confirm compliance with the directi
Savvio 10K.5 SAS Product Manual, Rev. G 53.1.4 China Restriction of Hazardous Substances (RoHS) DirectiveThis product has an Environmental Protection
6 Savvio 10K.5 SAS Product Manual, Rev. G4.0 General descriptionSavvio drives provide high performance, high capacity data storage for a variety of sy
Savvio 10K.5 SAS Product Manual, Rev. G 74.1 Standard featuresSavvio® 10K.5 SAS drives have the following standard features:• 1.5 / 3 / 6 Gb Serial At
8 Savvio 10K.5 SAS Product Manual, Rev. GNote. There is no significant performance difference between Self-Encrypting Drive and standard (non-Self-Enc
Savvio 10K.5 SAS Product Manual, Rev. G 95.0 Performance characteristicsThis section provides detailed information concerning performance-related char
10 Savvio 10K.5 SAS Product Manual, Rev. G5.2.2 Format command execution time for 512-byte sectors (minutes) 900GB models 600GB models 450GB models 30
Savvio 10K.5 SAS Product Manual, Rev. G 115.4 Prefetch/multi-segmented cache controlThe drive provides a prefetch (read look-ahead) and multi-segmente
Revision history© 2012 Seagate Technology LLC. All rights reserved.Publication number: 100628561, Rev. G January 2012Seagate, Seagate Technology and
12 Savvio 10K.5 SAS Product Manual, Rev. G5.5.1 Caching write data Write caching is a write operation by the drive that makes use of a drive buffer st
Savvio 10K.5 SAS Product Manual, Rev. G 136.0 Reliability specificationsThe following reliability specifications assume correct host and drive operati
14 Savvio 10K.5 SAS Product Manual, Rev. G6.1.3 Seek errorsA seek error is defined as a failure of the drive to position the heads to the addressed tr
Savvio 10K.5 SAS Product Manual, Rev. G 156.2.4 S.M.A.R.T.S.M.A.R.T. is an acronym for Self-Monitoring Analysis and Reporting Technology. This technol
16 Savvio 10K.5 SAS Product Manual, Rev. GError rate is the number of errors per operation. The algorithm that S.M.A.R.T. uses to record rates of erro
Savvio 10K.5 SAS Product Manual, Rev. G 176.2.6 Drive Self Test (DST)Drive Self Test (DST) is a technology designed to recognize drive fault condition
18 Savvio 10K.5 SAS Product Manual, Rev. G6.2.6.2.3 Short and extended testsDST has two testing options:1. short2. extendedThese testing options are d
Savvio 10K.5 SAS Product Manual, Rev. G 196.2.7 Product warrantySee Section 1.0 for warranty contact information.ShippingWhen transporting or shipping
20 Savvio 10K.5 SAS Product Manual, Rev. G7.0 Physical/electrical specificationsThis section provides information relating to the physical and electri
Savvio 10K.5 SAS Product Manual, Rev. G 217.1.1 PowerChoice reporting methodsPowerChoiceTM provides these reporting methods for tracking purposes:Requ
Savvio 10K.5 SAS Product Manual, Rev. G iContents1.0 Seagate Technology support services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
22 Savvio 10K.5 SAS Product Manual, Rev. G Table 2: 900GB standard drive DC power requirementsNotes3.0Gb mode 6.0Gb mode(Amps) (Amps) (Amps) (Amps)V
Savvio 10K.5 SAS Product Manual, Rev. G 23 Table 3: 600GB standard drive DC power requirementsNotes3.0Gb mode 6.0Gb mode(Amps) (Amps) (Amps) (Amps)Vo
24 Savvio 10K.5 SAS Product Manual, Rev. GTable 4: 450GB standard model DC power requirementsNotes3.0Gb mode 6.0Gb mode(Amps) (Amps) (Amps) (Amps)Vol
Savvio 10K.5 SAS Product Manual, Rev. G 25[1] Measured with average reading DC ammeter. Instantaneous +12V current peaks will exceed these values. Pow
26 Savvio 10K.5 SAS Product Manual, Rev. G[5] This condition occurs after OOB and Speed Negotiation completes but before the drive has received the No
Savvio 10K.5 SAS Product Manual, Rev. G 277.3.3 Current profilesThe +12V and +5V current profiles for the Savvio 10K.5 drives are shown below. Figure
28 Savvio 10K.5 SAS Product Manual, Rev. G Figure 2. Current profiles for 600GB models
Savvio 10K.5 SAS Product Manual, Rev. G 29Figure 3. Current profiles for 450GB models
30 Savvio 10K.5 SAS Product Manual, Rev. GFigure 4. Current profiles for 300GB modelsNote: All times and currents are typical. See Tables 2 through 5
Savvio 10K.5 SAS Product Manual, Rev. G 317.4 Power dissipation 900 GB models in 3Gb operationTypical power dissipation under idle conditions in 3Gb o
ii Savvio 10K.5 SAS Product Manual, Rev. G7.4 Power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
32 Savvio 10K.5 SAS Product Manual, Rev. G900GB models in 6Gb operationTypical power dissipation under idle conditions in 6Gb operation is 4.42 watts
Savvio 10K.5 SAS Product Manual, Rev. G 33600 GB models in 3Gb operationTypical power dissipation under idle conditions in 3Gb operation is 3.78 watts
34 Savvio 10K.5 SAS Product Manual, Rev. G600GB models in 6Gb operationTypical power dissipation under idle conditions in 6Gb operation is 3.82 watts
Savvio 10K.5 SAS Product Manual, Rev. G 35450GB models in 3Gb operationTypical power dissipation under idle conditions in 3Gb operation is 3.73 watts
36 Savvio 10K.5 SAS Product Manual, Rev. G450GB models in 6Gb operationTypical power dissipation under idle conditions in 6Gb operation is 3.75 watts
Savvio 10K.5 SAS Product Manual, Rev. G 37300GB models in 3Gb operationTypical power dissipation under idle conditions in 3Gb operation is 3.46 watts
38 Savvio 10K.5 SAS Product Manual, Rev. G300GB models in 6Gb operationTypical power dissipation under idle conditions in 6Gb operation is 3.48 watts
Savvio 10K.5 SAS Product Manual, Rev. G 39b. Non-operating–40° to 158°F (–40° to 70°C) package ambient with a maximum gradient of 36°F (20°C) per hour
40 Savvio 10K.5 SAS Product Manual, Rev. G7.5.4.1 Shocka. Operating—normalThe drive, as installed for normal operation, shall operate error free while
Savvio 10K.5 SAS Product Manual, Rev. G 417.5.4.2 Vibrationa. Operating—normalThe drive as installed for normal operation, shall comply with the compl
Savvio 10K.5 SAS Product Manual, Rev. G iii12.4 Miscellaneous operating features and conditions . . . . . . . . . . . . . . . . . . . . . . . . . . .
42 Savvio 10K.5 SAS Product Manual, Rev. G7.5.7 AcousticsSound power during idle mode shall be 3.0 bels typical when measured to ISO 7779 specificatio
Savvio 10K.5 SAS Product Manual, Rev. G 437.6 Mechanical specificationsRefer to Figure 15 for detailed mounting configuration dimensions. See Section
44 Savvio 10K.5 SAS Product Manual, Rev. G8.0 About FIPSThe Federal Information Processing Standard (FIPS) Publication 140-2 is a U.S. Government Comp
Savvio 10K.5 SAS Product Manual, Rev. G 45 Figure 16. Example of FIPS tamper evidence labels. Note. Image is for reference only, may not represent act
46 Savvio 10K.5 SAS Product Manual, Rev. G9.0 About self-encrypting drivesSelf-encrypting drives (SEDs) offer encryption and security services for the
Savvio 10K.5 SAS Product Manual, Rev. G 479.2.3 Default passwordWhen the drive is shipped from the factory, all passwords are set to the value of MSID
48 Savvio 10K.5 SAS Product Manual, Rev. G1. The download must be an SED file. A standard (base) drive (non-SED) file will be rejected.2. The download
Savvio 10K.5 SAS Product Manual, Rev. G 4910.0 Defect and error management Seagate continues to use innovative technologies to manage defects and erro
50 Savvio 10K.5 SAS Product Manual, Rev. GTable 6 equates the read and write retry count with the maximum possible recovery time for read and write re
Savvio 10K.5 SAS Product Manual, Rev. G 51With BMS, the host system can consume less power and system overhead by only checking BMS status and results
iv Savvio 10K.5 SAS Product Manual, Rev. G
52 Savvio 10K.5 SAS Product Manual, Rev. G10.8 Protection Information (PI)Protection Information is intended as a standardized approach to system leve
Savvio 10K.5 SAS Product Manual, Rev. G 5311.0 InstallationSavvio disk drive installation is a plug-and-play process. There are no jumpers, switches,
54 Savvio 10K.5 SAS Product Manual, Rev. G11.1 Drive orientation The drive may be mounted in any orientation. All drive performance characterizations,
Savvio 10K.5 SAS Product Manual, Rev. G 5511.3 Drive mountingMount the drive using the bottom or side mounting holes. If you mount the drive using the
56 Savvio 10K.5 SAS Product Manual, Rev. G12.0 Interface requirements This section partially describes the interface requirements as implemented on Sa
Savvio 10K.5 SAS Product Manual, Rev. G 5712.2 Dual port supportSavvio SAS drives have two independent ports. These ports may be connected in the same
58 Savvio 10K.5 SAS Product Manual, Rev. G LP bit N Protocol-specific Log Page for SAS (18h) YLog Sense 4Dh Y Application Client Log page (0Fh) Y Bu
Savvio 10K.5 SAS Product Manual, Rev. G 59 DPO bit supported Y FUA bit supported YRead (12) A8h NRead (16) 88h YRead (32) 7Fh/0009h NRead Buffer (mo
60 Savvio 10K.5 SAS Product Manual, Rev. G[1] Savvio drives can format to 512, 520, 524 or 528 bytes per logical block.[2] Warning. Power loss during
Savvio 10K.5 SAS Product Manual, Rev. G 6112.3.1 Inquiry data Table 10 lists the Inquiry command data that the drive should return to the initiator pe
Savvio 10K.5 SAS Product Manual, Rev. G vList of FiguresFigure 1. Current profiles for 900GB models . . . . . . . . . . . . . . . . . . . . . . . .
62 Savvio 10K.5 SAS Product Manual, Rev. GSaved values are stored on the drive’s media using a Mode Select command. Only parameter values that are all
Savvio 10K.5 SAS Product Manual, Rev. G 63Table 11: Mode Sense data for 900GB drives MODE DATA HEADER: 01 9a 00 10 01 00 00 10 BLOCK DESCRIPTOR: 00
64 Savvio 10K.5 SAS Product Manual, Rev. GTable 12: Mode Sense data for 600GB drives MODE DATA HEADER: 01 9a 00 10 01 00 00 10 BLOCK DESCRIPTOR: 00
Savvio 10K.5 SAS Product Manual, Rev. G 65Table 13: Mode Sense values for 450GB drives MODE DATA HEADER: 01 9a 00 10 01 00 00 10 BLOCK DESCRIPTOR:
66 Savvio 10K.5 SAS Product Manual, Rev. GTable 14: Mode Sense values for 300GB drives MODE DATA HEADER: 01 9a 00 10 01 00 00 10 BLOCK DESCRIPTOR:
Savvio 10K.5 SAS Product Manual, Rev. G 6712.4 Miscellaneous operating features and conditions Table 15 lists various features and conditions. A “Y” i
68 Savvio 10K.5 SAS Product Manual, Rev. G12.4.1 SAS physical interface Figure 19 shows the location of the SAS device connector J1. Figures 20 and 21
Savvio 10K.5 SAS Product Manual, Rev. G 69 Figure 20. SAS device plug dimensionsC OF DATUM BL5.081.27 (6X)1.27 (14X)15.8750.35MIN15.87533.43 0.05B4
70 Savvio 10K.5 SAS Product Manual, Rev. GFigure 21. SAS device plug dimensions (detail)6.10Detail A0.30 0.05 x 45 (5X)0.40 0.05 X 45 (3X)CORING
Savvio 10K.5 SAS Product Manual, Rev. G 7112.4.2 Physical characteristics This section defines physical interface connector.12.4.3 Connector requireme
72 Savvio 10K.5 SAS Product Manual, Rev. G12.4.6 SAS transmitters and receiversA typical SAS differential copper transmitter and receiver pair is show
Savvio 10K.5 SAS Product Manual, Rev. G 73The Ready LED Out signal is designed to pull down the cathode of an LED. The anode is attached to the proper
74 Savvio 10K.5 SAS Product Manual, Rev. G
Savvio 10K.5 SAS Product Manual, Rev. G 75IndexNumerics12 voltpins 725 volt pins 726 Gbps 73Aabort task set function 56AC coupling 72AC powe
76 Savvio 10K.5 SAS Product Manual, Rev. Gdisk rotation speed 9drive 41drive characteristics 9drive failure 14Drive Locking 47drive mounting
Savvio 10K.5 SAS Product Manual, Rev. G 77Makers Secure ID 46maximum delayed motor start 22, 23, 24, 25maximum start current 22, 23, 2
78 Savvio 10K.5 SAS Product Manual, Rev. Gdocuments 5relative humidity 39reliability 8specifications 13reliability and service 14repair and
Savvio 10K.5 SAS Product Manual, Rev. G 79Wwarranty 19Zzero latency read 67zone bit recording (ZBR) 7
80 Savvio 10K.5 SAS Product Manual, Rev. G
Savvio 10K.5 SAS Product Manual, Rev. G 11.0 Seagate Technology support servicesSEAGATE ONLINE SUPPORT and SERVICESFor information regarding products
Seagate Technology LLCAMERICAS Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000 ASI
Kommentare zu diesen Handbüchern